Description

Hammerhead Service-21 Pool Vacuum Cleaning Machine with 21″ Head and 40′ Cord,SERVICE-21

Hammerhead Service-21 SERVICE-21 Pool Vacuum Cleaning Machine with 21″ Head and 40′ Cord. Service-21 and Service-30 units are meant for pool-to-pool route work, and include a mount assembly for transport. Mount assemblies (HH1306) are compatible with any 2″ hitch receiver (vehicle hitch not included). The two standard units are the Service-21, which has a 21″ vacuum head and a 40ft power cord, and the Service-30, which has a 30″ vacuum head and a 60ft power cord. Service-21 units are also available with a 60ft power cord as an option. Service units ship partially assembled. Some assembly and set-up of the vehicle mount is required.

SERVICE UNITS – FOR POOL ROUTE TECHNICIANS

Service-21and Service-30units are meant for pool-to-pool route work, and includea mount assembly for transport. Mount assemblies (HH1306) are compatible with any 2″ hitch receiver (vehicle hitch not included).The two standard units are the Service-21, which has a 21″ vacuum head and a 40ft power cord, and the Service-30, which has a 30″ vacuum head and a 60ft power cord. Service-21 units are also available with a 60ft power cord as an option. (See Optional Configurationsbelow). Service units ship partially assembled. Some assembly and set-up of the vehicle mount is required. (Due to ongoing improvements, products may be slightly different than pictured).

NOT INCLUDED:

• 12 VOLT DEEP CYCLE MARINE BATTERY

• BATTERY CHARGER

• STANDARD POOL POLE

SPECIFICATIONS:

• 21″ OR 30″ INJECTION MOLDED VACUUM HEAD

• NON-MARKING, BEARINGLESS, CAST URETHANE HEAD WHEELS

• STAINLESS POLE SWIVEL MOUNT (two position adjustable angle standard on the Service-30)

• ALL STAINLESS HARDWARE

• FEATURING THE PATENTED SMART SWITCH™ (The new HH1062 Smart Switch comes standard on all Hammer-Head pool cleaning units. SMART SWITCH™ features include a motor-saving overload sensor, two speeds, and an automatic shutoff when the motor is out of the water for more than a minute).

• L.E.D. battery voltage meter

• SEALED AND PRESSURE TESTED MOTOR

• 40FT OR 60FT FLOATING POWER CORD

• TWO BLADE PROPELLER

• WELDED ALUMINUM CADDY CART

• 20″ MAG BMX-STYLE CART WHEELS

• NON-MARKING SOLID TIRES

• STAINLESS WHEEL BEARINGS

• VEHICLE MOUNT ASSEMBLY (HH1306) **Your vehicle must be equipped with a standard 2” hitch receiver.

• TWO DEBRIS BAGS (HH1506 AND HH1508)

• SERVICE-21 WEIGHT WITH 27 SERIES MARINE BATTERY: 155 LBS

  (approximate)

• SERVICE-30 WEIGHT WITH 27 SERIES MARINE BATTERY: 157 LBS

  (approximate)

• 21″ VACUUM HEAD MOTOR WEIGHT: 11 LBS

• 30″ VACUUM HEAD MOTOR WEIGHT: 13 LBS

OPTIONAL CONFIGURATIONS:

• SERVICE-21-60 (with 60ft power cord)

• SERVICE-21-NM (without the vehicle mount assembly)

• SERVICE-30-NM (without the vehicle mount assembly)

• SERV-CART (complete cart assembly only)

• SERV-CART-NM (complete cart assembly without the vehicle mount)

• HH1070 CART FRAME ONLY (see PARTS)

SHIPPING DIMENSIONS:

• PALLETIZED DIMENSIONS: 30 X 34 X 52 HIGH (one unit per pallet)

• SHIPPING WEIGHT: 110lbs

• FREIGHT CLASS: 250

Resources