************************************************

GENERAL DESCRIPTION:12″X 12″ SQUARE RETROFIT MAIN DRAIN COVER, WHITE

************************************************

BASIC SPECS:2 OF THE SIDES HAVE 1 HOLE IN THE CENTER2 OF THE SIDES HAVE 5 HOLES WITH 1 IN THE CENTERSEE BELOW FOR DETAILSUSAGE: APPROVED FOR FLOOR OR WALL USAGESPECS:SPECS SHOWN ARE FOR A SINGLE UNITFLOOR: 188 GPMWALL: 160 GPMLIFE: 6 YEARS

************************************************

DETAILED DESCRIPTION:THIS IS A 12″ X 12″ SQUARE REPLACEMENT COVERTHIS IS AN ANTI-ENTRAPMENT RETROFIT COVER AND SCREWSTHIS HAS SCREW HOLES DESIGNED TO LET IT REPLACE A WATERWAY, HAYWARDOR PENTAIR 12″ X 12″ SQUARE COVERTHIS IS A MODEL 10064ACVGB, 11″ ROUND COVER ATTACHED TO A SQUARE ADAPTOR PLATEEACH SIDE OF THE SQUARE PLATE HAS A SQUARE NOTCH AT THE BOTTOMMATERIAL:PLASTIC COVER, STAINLESS STEEL SCREWSCOLOR: WHITESHAPE: SQUARE

************************************************

COVER DIMENSIONS:COVER LENGTH WIDTH: 11-11/16″ (A)HEIGHT: 1-1/16″ (AT THE OUTSIDE EDGE)MAXIMUM HEIGHT: 1-7/8″ (AT THE CENTER OF THE COVER) (B)MAXIMUM HEIGHT ABOVE PLASTER LINE: 13/16″ FOR A 1-1/16″ DEEP FRAMETHIS WILL DEPEND ON THE DEPTH OF THE FRAME(THE SIDE OF THE COVER IS FLUSH WITH A 1-1/16″ DEEP FRAME AT THE EDGE)THE CENTER OF THE COVER IS 13/16″ TALLER THAN THE EDGE

************************************************

SCREW HOLES:IN ADDITION TO THE SCREW HOLES AT THE EDGES OF THE ADAPTOR, THERE ARE 2 SCREWS TOATTACHED THE ROUND CENTER COVER TO THE SQUARE ADAPTOR.THERE ARE 4 SMALL SCREW HOLES IN THE SQUARE ADAPTOR. ANY 2 OPPOSITE HOLES ARE TOMOUNT THE ROUND COVER TO THE ADAPTORTHE COVER HAS SCREWS PLACED SO THE COVER WILL MATCH THE OLDER STANDARD WATERWAY,AND THE PENTAIR AND HAYWARD OLDER AND CURRENT FRAMESTHERE IS ALSO AN 5/8″ DEEP NOTCH, 1/2″ WIDE IN THE CENTER OF EACH SIDESCREW HOLE PLACEMENT:TOTAL SCREW HOLES – 164 OF THESE ARE SMALL HOLES TO ATTACH THE COVERTHERE ARE 2 SIDES WITH A SINGLE SCREW HOLETHERE ARE 2 SIDES WITH 5 SCREW HOLESFOR THE 2 SIDES WITH 5 HOLESTHE DISTANCE FROM EACH HOLE CENTERLINE TO THE EDGE IS 5/16″FROM EACH SCREW HOLE TO THE OPPOSITE HOLE IS 11-1/16″ (MEASURED ON THE CENTERLINE OF EACH HOLE)FOR THE 2 SIDES WITH 1 HOLETHE DISTANCE FROM EACH HOLE CENTERLINE TO THE EDGE IS 5/16″FROM EACH SCREW HOLE TO THE OPPOSITE HOLE IS 11-1/16″ (MEASURED ON THE CENTERLINE OF EACH HOLE)THERE IS ONE SCREW HOLE IN THE CENTER OF EACH SIDEON THE SIDES WITH 5 HOLESTHE HOLES NEXT TO THE CENTER ARE 1-7/16″ FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE)THE OUTSIDE HOLES ARE 4-5/16″ FROM THE CENTER HOLE (MEASURED ON THE CENTERLINE OF EACH HOLE)

************************************************

SCREWS:(6) #8 X 3/4″ LONG SELF TAPPING2 OF THESE ARE TO MOUNT THE ROUND COVER TO THE SQUARE ADAPTOR

************************************************